Juki LK1903 BSS


  • The machine achieves sewing speed of 2,700rpm
  • The machine's starting, stopping, thread-trimming and automatic presser lifting speeds have been increased to significantly shorten total cycle time
  • The machine is provided as standard with 50 different sewing patterns
  • The machine permits easy changeover of sewing patterns for effortless execution of an inexhaustible range of sewing specifications
  • The LK-1903A is also able to sew buttons using the same data used for the LK-1903 (EP-ROM)
  • Newly developed needle thread grasping mechanism helps produce consistent knot tying at the beginning of sewing. (This device has been factory-set to “invoking prohibited” status at the time of delivery.)
  • The machine is provided as standard with an auto-lifter that uses a new stepping-motor system
  • This helps reduce operator fatigue
  • It is also possible to change over the stroke of the auto-lifter from a one-step stroke to a double-step stroke, which offers easier positioning of a material on the machine
  • For the double-step stroke, an intermediate stopping height can be established on the operation panel
  • The work clamp foot lift can be set to a maximum of 13mm
  • Operation Panel (You can choose operation panel)
  • Complete with table stand and motor
Juki LK1903 BSS

Juki LK1903 BSS
Computer-Controlled High-Speed Button Sewer

Price: $6,700.00

(You can always remove it later.)

Since the machine is provided with an active tension mechanism, it is able to set a needle thread tension that matches various sewing conditions (such as thread, material and sewing speed) on the operation panel, store the data in memory and reproduce it.

The needle thread tension can be set separately according to the portion of a seam, such as the beginning of a seam, during sewing and end of the seam (fastening stitch).

When the operation panel IP-200B is used with the machine, the needle thread tension can be established on a stitch-by-stitch basis for upgraded seam quality.