Cowboy CB-10

Cowboy CB-10
Cowboy

Cowboy CB-10
Hydraulic Clicker Press

Price: $2,995.00

(You can always remove it later.)
Cowboy

The Cowboy Model CB-10 swing arm presses offers an excellent combination of value and versatility. This clicker press offers a higher tonnage alternative to other lower rated machines in the market, and yet the price of the leather clicker press is very affordable. This hydraulic swing beam clicker press can be used to both emboss leather using an embossing plate and cut leather using steel rule cutting dies. 

The CB-10 generates over 10 US tons of cutting pressure. This hydraulic clicker press features a height adjustable beam to accommodate for different thicknesses of die stock as well as an aluminum plate on the underside of the cutting beam which is replaceable.

Cowboy

The leather clicker press features a heavy steel frame designed for industrial use cycles. The polypropylene cutting pad on the bed of the machine is easily replaced should it become worn. 

The heavy duty hydraulic pump and cylinder of this clicker press is designed for heavy use cycles in an industrial setting. Yet this hydraulic clicker press is priced low enough that it is easily affordable for the small shop owner. 

10 tons of continuous cutting pressure insures that the CB-10 will deliver enough force to use a wide variety of small, medium, and large cutting dies of variable height and thickness.

The cutting bed is sized at approximately 16X30 inches. The cutting beam is approximately 12 inches wide.

Cowboy

The die cutting press machine has a fail safe safety mechanism built in using two joystick controllers. Both buttons must be pressed simultaneously in order for the machine to cycle. This keeps the operator's hands clear of the work. 

The comparatively low price of the CB-10 when compared to other smaller tonnage machines in the market makes it an ideal choice for the small shop or manufacturer that is seeking a machine capable of producing higher tonnage than the 8-10 ton machines available in this price range. A full 10 tons of power is available with the CB-10 machine at a price that is competitive with much smaller machines.


The CB-10 swing beam die cutting press runs off of commonly available 220v single phase current. Many clicker presses of this type are made to run on 3 phase current, making them impractical for the small shop owner. The CB-10 hydraulic clicker press is set to run on 220v single phase at no additional charge. Many sellers of these machines charge close to $1000.00 for this upgrade Try a CB-10 hydraulic swing beam clicker press for your next clicker purchase and allow us to show you the Cowboy Advantage today!!!!!