Jack JK-5559G


  • Direct Drive AC Servo Motor
  • Adjustable Sewing Speed
  • Programmable Sewing Operations
  • Edge Trimmer with 26mm Dust Collector
  • Automatic Foot Lifter
  • Automatic Thread Cutter
  • Automatic Bartacking
  • Needle Position Sensor (Up/Down)
  • Electronic Thread Tensioner
  • Reverse Button on Machine Head
  • Half/Full Stitch Button on Machine Head
  • Semi-Dry Oil System
  • Integrated Bobbin Winder
  • Integrated Adjustable LED
  • Complete with Table and Stand
  • Stand fully assembled
Jack JK-5559G

Jack JK-5559G
Computerized, Direct Drive, Semi-Dry, Drop Feed, Single Needle Sewing Machine with Edge Trimmer

Price: $1,450.00

(You can always remove it later.)

The Jack JK-5559G is one of the most advanced edge trimmer lockstitch machines on the market. Built off the same design of our A4 series of machines, the JK-5559G comes standard with several features our competitors charge extra. The JK-5559G comes standard with an automatic presser foot lifter, automatic thread trimmer, auto bartack functions as well as the ability to program sewing functions; our "Semi-Dry" head are also standard, virtually eliminating the possibility of oil contamination. The edge trimming function can also be disabled so the machine can be used as a traditional lockstitch machine.


Work Smarter

The Jack JK-5559G was designed to improve operator efficiency and reduce fatigue. Built on the same all steel chassis as the rest of the Jack lineup and driven by the coaxial direct drive AC servo motor, the JK-5559G is full of features not found on competitively priced machines.


Simplified Control

The Jack JK-5559G control panel is simple and intuitive. From the control panel the user can adjust sewing speed, set needle position (up/down), turn on/off auto thread trimmer function, set automatic foot lifter operation, turn on/off electronic thread tension, set bartacking function or even program segmented sewing allowing the operator to repeat simple sewing tasks like sewing labels or pockets.


User Friendly

The Jack JK-5559G comes standard with integrated adjustable LED lighting, a half/full stitch button and a reverse button that can be used instead of the reverse lever. The presser foot can be raised by hand or automatically by foot pedal. On top of the machine is an integrated bobbin winder, allowing you to wind bobbins while continuously sewing.


Direct Drive

No complicated motors or belts to deal with; the Jack JK-5559G comes equipped with an integrated AC servo motor. The servo motor is mated to the machine head by a proprietary coaxial shaft that reduces vibration and noise; this allows the user to perform consistent seams at any speed.


Automatic Foot Lifter

The Jack JK-5559G features an automatic foot lifter with a variety of settings. The foot lifter can be set to automatically lift with the optical fabric sensor or simply by slightly depressing the foot pedal backwards. There are several settings that can be adjusted by the push of a button depending on the needs of the sewing operation.


Large Dust Collector

The Jack JK-5559G features a large 26mm dust collector that ensures a clean workspace. The integrated edge cutter can also be toggled on and off so the machine can be used as a traditional sewing machine.


Dry Head

The Jack JK-5559G head was designed to operate dry by utilizing a special DLC (Diamond Like Carbon) coating on the needlebar. This coating allows the machine head to operate without the use of lubricating oil virtually eliminating the possibility of oil contamination on fabrics.


Binding Operation (Optional)

The Jack JK-5559G can be equipped with an optional binder to seamlessly complete two operations at once.


Modern Design

The Jack Sewing Machine Co. LTD, lineup of machines have all undergone design updates improving not only functionality but aesthetics. In addition to the redesigned machine head, the heavy duty table and stand have all undergone updates as well. Each machine ships as a complete set.