Juki LU-1508NH
Specifications
Maximum stitch length: | 9 mm |
Needle bar stroke: | 36 mm |
Alternating vertical movement: | 2.5 mm - 6.5 mm |
Thread take-up: | slide type |
Hook: | Vertical-axis, double-capacity hook |
Thread: | #30 |
#5, B46: | |
B138: | |
Weight: | 93.7 lbs |
extra large steel handwheel with a diameter of 175mm: | |
Juki LU-1508NS Needle System SY3355 Juki Part No. MC-3720016-00 or generic 190R-Long: | |
Juki LU-1508NS Bobbin, Juki Part Number B9117-563-000,: | |
|
Juki LU-1508NH Industrial Sewing Machine- Extra heavy-duty
Price: $2,950.00(You can always remove it later.)
|
The H in LU-1508NS means very heavy duty, with longer stroke 190R Needles which allows for thicker fabrics and higher foot lift, a bigger hole in needle plate for thicker threads, and bigger teeth on the feed dogs which allow better feeding on thicker fabrics, etc compared to LU-1508NS and 1541N that take shorter stroke 135x17 needles.
N Stands for the Color: White
H Stands for Extra Heavy Duty 10-15% heavier duty than the Standard NS Version, with a longer needle and higher stroke.
Note: Assembled Table , Stand and Motor. The very best heavy duty compound feed, walking foot and needle feed machine for applications including auto upholstery.
- Single Needle
- Needle Feed And Walking Foot
- 2500 Stitches Per Minute
- New Rectangular Feed Prevents Gathering
- Includes Table, Stand, And Motor
- Handles Heavyweight Materials
- Industrial Sewing Machine
|
The Juki LU-1508NS replaces the very successful Juki 562/563 model, which was sold for over 20 years and is still is use with many manufactures.
This new model has many new features which Juki has researched & tested thought-out the heavy-weight fabric industry.
It is a general purpose needle feed, walking foot machine for use on medium-heavy weight materials and is suited to sewing, for example, car seats, carpets, general upholstery and leather articles etc.
|
- New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
- Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
- With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
- Well tensed seams are consistently produced without pitch errors
- With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
- Stitch length can be easily selected by the stitch dial
- Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large hand-wheel
- Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
- Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
- Alternating vertical movement mechanism prevents irregular stitches
- High 16 mm presser foot lift enables easy material handling
- Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
- If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
- Pressing the reset button will immediately return the machine back to the normal state
- US Warranty 90 Days labor on defects in materials and workmanship.
- Non-US Warranty: 30 days parts and labor
|
- New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
- Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
- Compared with elliptical feed, rectangular feed helps reduce gathered stitches
- With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
- Well tensed seams are consistently produced without pitch errors
- With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
- Stitch length can be easily selected by the stitch dial
- Many improved features offer enhanced operability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large handwheel
- Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
- Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
- Alternating vertical movement mechanism prevents irregular stitches
- High 16 mm presser foot lift enables easy material handling
- Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
- If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
- Pressing the reset button will immediately return the machine back to the normal state.
|
|